Search This Supplers Products:car led headlightled work lightled light barHID Xenon Kitscar logo lightcar music light
Paramtents
Type Headlight
Voltage 9~16V
Lamp Type HID Xenon
Certification CE
Car Make all cars
Stable Current: 35W & 3.2A & 13.2V
Working Temperature: -40--+105 degree Celsius
Start Current: <6A & 12V
Available wattage: 35 Watts
Key word hid headlights kit
Max Start Voltage: 23kv
lifetime of ballast: 3500hours
Color: black/silver
OEM: available
Packging & Delivery
Min Order1 piece
Briefing
Detailed
CE approval factory supply hid headlights kit HID kits
1. high quality hid headlights kit
2. Low Defective rate less than 2%
3. Best price, quality and service hid headlights kit
4. 15 months warranty CE approval factory supply xenon hid kits china HID xenon kits
Technical detail forhid headlights kit
Input Voltage | 9~16v |
Rated Voltage | 13.5v |
Max Start Voltage | 23kv |
Max Input Current | 3.2A |
Output Power | 35w |
Working Temperature | -40°~ +105° |
Power Efficiency | above 85% |
Working Frequency | 260~310Hz |
lifetime of ballast | 3500hours |
lifetime of xenon bulbs | over 2500hours |
hid headlights kit Descriptions:
HID Single beam bulb: H1,H3,H4,H7,H8,H9,H10,H11,H13(9008),H16(5202),
9004(HB1),9005(HB3),9006(HB4),9007(HB5),880,881,D1S/C,D1R,D2S/C,D2R,D3S/C,D4S/C,D4R;
HID Fexible Lamp(High/Low,Hi/Lo, Bi-xenon): H4-3(Hi/Lo),H13-3(Hi/Lo),9004-3(Hi/Lo),9007-3(Hi/Lo); HID Xenon+Halogen Lamp: H4-2, H13-2, 9004-2, 9007-2; HID Double/Dual/Bi-Xenon Lamp(Xenon+Xenon): H4-4, H13-4, 9004-4, 9007-4;
Advantage of hid headlights kit
1. Great Visibility and Road Safety
2. Waterproof, circuit protection
3. Easy installation
4. Wide color temperature
Quality control process before shipment:
1) 6 hours continuous working aging test.
2) Connection circuit protection test.
3) Short circuit protection test.
4) Lack of voltage protection test.
5) Over voltage protection test.
6) Flash light concussion test.
7) Quakeproof capability test.
8) Cold warm boot test.
9) Polarity protection test.
10) EMC anti-jamming test.
hid headlights kit Packing include:
Ballast | 1 pcs |
Bracket | 1pcs |
Screw | 2pcs |
Small White Box | 1 pcs |
packing | 50 pcs ballast /1 Carton (44.5x 35.0x 38.0 cm) |
Basic fittings with hid headlights kit
2pcs of HID xenon bulb (as per your need, all bulb type and color temperatures available)
2pcs of HID xenon ballast (DC/AC, 12V/24V, 35W/50W/70W available)
Mounting brackets
Installation instruction
All necessary accessories
CE approval factory supply xenon hid kits china Installation of hid headlights kit
1, Please open the hood and take off the assembly of the headlights on the two sides
(left and right).In the case of enough room for installation, the headlights may not be taken down.
2, Open up the back cap of the assembly of headlights and take out the original bulbs.
3, Drill a hole in the middle of the back cap with a 25mm cutter.
4, Take down the plastic cover surrounding the HID head lamp.
5, Put the HID head lamp into the headlights.
6, First plug the bulbs wiring harness into the rubber base and then put it into the back cap of assembly.
After that, please shut the headlight shield tightly.
Safety Instruction for hid headlights kit
1, Please wait for the entire cool-down of the car
lighting and engine for the sake of safety in installation.
2, Before the installation, please confirm that the gear is at 'N' or 'P'
and insure that the switch is off in installation.
3, Be carful to avoid scald, especially in turning on/off the car lighting.
Be careful to avoid beating and cutting bulbs, not to touch bulbs with fingers, which will bring blot.
4, Be careful to examine the connection of the contactor, ports and voltaic wire.
False connection will bring on lighting problems.
5, Please let the end of bulb not touch the interior light shield of the headlight assembly when adjusting the bulb.
6, Please drill a hole of 25mm in the back cap of resin or rubber on the headlight.
In connection the bulb and the stepup transformer, do not connect the wrong electrode.
7, In putting through the power supply of a step-up transformer, do not connect the wrong electrode.
Transaction Terms:
Promotion | Wholesale Price to attract more buyer. |
Brand Name | LIWIN/OEM/ODM |
Place of origin | Guangdong, China (Mainland) |
Payment Terms | L/C, T/T, Western Union |
FOB Port | Guangzhou / China |
Minimum Order | 1 Set/1 Pcs |
Delivery Details:
Sample Order: | 1-3 days after got the payment |
big order: | 6-14 days after got the payment |
...
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.