Search This Supplers Products:car led headlightled work lightled light barHID Xenon Kitscar logo lightcar music light
US $5.601 - 40,000 piece
US $1.0040,001 - 999,999 piece
Paramtents
Type Headlight
Voltage 12V
Lamp Type HID Xenon
Certification Ce Rosh Vde CCC
Car Make All car
Type: ballast
Power: 35W
Style: Electronic
lifetime: 30000 hours
Operating temperature -40~+150degree
Aluminum cast: water-proof and vibration resistant
Usage High Intensity Discharge
starting voltage: < 23000V
normal ballast: normal ballast
Key word: normal ballast
Packging & Delivery
Min Order1 piece
Briefing
Detailed
HID normal ballast
Ballast: Low Anti-electronic jamming
Ballast: Low Defective rate
Ballast: Certification:CE
Ballast: Warranty:16mth
ballast
1.High quality and good price.
2.Short delivery time.
3.Good service
Model: HID normal ballast
1.Operation temperature | -40 to +85 |
2.Steady state light output | >4500 lumens(for 4300k) typical,bulb type dependent |
3.Turn on light output power | >50W after 47 sec |
4.Expected ballast life | >3000 hours typical |
5.Cooling | Conductively cooled |
Electrical output | |
6.Output waveform | 400 ± 50Hz square wave |
7.Steady state output power | 48W± 2W |
8.Open circuit protection(lamp is on) | Latch off ballast after 2 sec max |
9.Short circuit protection | Latch off ballast after 150msec max |
10.Start current | 5A±0.5A initial bulb on . |
11.Maximum output power | 80W |
12.Steady state output volts | 68V to 160V |
13.starting voltage | < 23000V |
Electrical input | |
14.Operation voltage | DC 9V~16V |
15.Max. in rush current | <30A (5us) after power on |
16.Max. Steady state input power | 53W |
17.Input turn off | >16V <8.5V |
18.Input turn on | >16V <8.5V |
19.Normal input current | 4.5A±0.1A(DC 12V) |
20.Reverse voltage protection | No damage to ballast with 1V ~ 16V |
Features:
1)Integrative single-board structure with dual-core digital technology, refined circuit.
2)High reliability, defective rate<2%, efficacy>83%, Low temperature rise.
3)Compatible with a bulb types, fast dynamic response
4)Totally develop and set up by ourselves, and own the intellectual property.
2.Performance:
Each HID ballast is individually tested.
1) Waterproof : Accord with DIN 40050 Standard
2) Dustproof : Accord with SAE J575 Standard
3) Shockproof : Accord with DIN 40046 Standard
The factory quality control process before shipment:
1) 6 hours continuous working aging test.
2) Connection circuit protection test.
3) Short circuit protection test.
4) Lack of voltage protection test.
5) Over voltage protection test.
6) Flash light concussion test.
7) Quakeproof capability test.
8) Cold warm boot test.
9) Polarity protection test.
10) EMC anti-jamming test.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.